MANITEX TC700

BOOM
Boom length: 38.5 ft. (11.8 m)
Extended boom length: 115 ft. (35 m)
Boom max. tip height: 125 ft. (38.1 m)
Boom angle (min/max): -4º/80º

ROTATION
Slewing speed: 0-2.0 rev./min.
Slewing brake: Free swing (pedal applied) Auto Brake – Spring applied hydraulically released
Boom rotation: 360º continuous

OUTRIGGERS
Outrigger: X-Pattern
Max.
• Front and rear:
Swing, out and down to outer edge of pad:
25 ft. 9.5 in. (7.9 m)
Mid.
• Front and rear:
Swing, out and down to outer edge of pad: 22 ft. 6 in. (6.9 m)
Min.
• Front and rear:
Swing, out and down to outer edge of pad: 19 ft. 3 in. (5.9 m)
Stowed
• Front and rear:
6 ft. 3 in. (2.0 m)
Radio remote – outrigger control

HOIST, ROPE AND HOOK
Winch speed:
First layer
• Low speed – 147.6 fpm (45 m/min)
• High speed – 295.2 fpm (90 m/min)
Fifth layer
• Low speed – 192 fpm (58.5 m/min)
• High speed – 384 fpm (117 m/min)
Max. line pull:
First layer
• Low speed – 14,500 lbs. (64.5 kN)
• High speed – 11,240 lbs. (50.0 kN)
Fifth layer
• Low speed – 7,080 lbs. (31.5 kN)
• High speed – 5,500 lbs. (24.5 kN)
Main & auxiliary winch cable diameter:
5/8 in. (16 mm)
Line length: 662 ft. (202 m) Non-spin cable
Main & auxiliary winch: Bent axis 2-speed hydraulic motor

” ”

HYDRAULICS
Max. system pressure at: 4,600 psi (320 bar)
Working system pressure: 3,625 psi (250 bar)
Hydraulic tank capacity: 220 gal. (832.8 L)
Pumps:
• 1 x Load sense piston pump rated at: 77 gpm (290 lpm)
• 1 x Gear pump rated at: 23 gpm (88 lpm)
• Full flow with bypass protection
• Return: 10 micron filter
• Full proportional control valves

CAB/CAB CONTROLS
• Joystick controls
• Boom extend/retract – slider thumb-switch
• Boom hoist/lower
• Main and auxiliary winch (optional) with thumpers
• Turret swing
• Thumb slide switch for engine rpm
• Foot pedal controls (engine rpm & swing brake)
• Electric over hydraulic controls system using 12 V system controls with Parker IQAN CANBUS system
• Swing lock switch

COUNTERWEIGHT
Main counterweight with integrated hydraulic mounting system
Hydraulic cylinders allow counterweights to be easily removed and attached without additional lifting devices for placement on the deck of the carrier.
• 1 x Counterweight: 5,500 lbs. (2,495 kg)
• 2 x Counterweight: 11,000 lbs. (4,990 kg)
• 3 x Counterweight: 16,500 lbs. (7,490 kg)
• Full Counterweight: 22,000 lbs. (9,980 Kg)

OPERATOR AIDS
• Wired LMI with crane function cut-offs for overload protection
• Graphical display
• Event recorder
• WADS – Work Area Definition System
• Wired anti-two block system

Optional Equipment
Crane cab air conditioner
Tool Box: Multiple configurations

OPTIONAL EQUIPMENT

JIB
Swing on jib
Angular offset: 0º, 20º, 40º
Max. boom length with extension:
185 ft. (56.4 m)
Min. boom length with extension:
146 ft. (44.5 m)
Fixed length: 31 ft. (9.45 m)
Extended length: 51 ft. (16.1 m)

HOIST, ROPE AND HOOK
Auxiliary head: Installs only to main boom.
Must be removed to use the jib.
Auxiliary winch speed:
First layer
• Low speed – 147.6 fpm (45 m/min)
• High speed – 295.2 fpm (90 m/min)
Fifth layer
• Low speed – 192 fpm (58.5 m/min)
• High speed – 384 fpm (117 m/min)
• Hook block – 45 T (40.8 mT)
• Hook block – 50 T (45.4 mT)
• Hook block – 60 T (54.4 mT) Quick Reeve
• Hook block – 70 T (63.5 mT) Quick Reeve
• Top swivel ball with hook and latch 7 T (6.4 mT)
2-person man basket – Steel
• Non-rotating (600 lbs. cap.)
• Rotating (1,200 lbs. cap.)
• Rotating (1,200 lbs. cap.) 2/quick attach

OPERATOR AIDS
3rd Wrap limiter, main and auxiliary winch
4-Function radio remote crane control system
• 900 Mhz
• 433 Mhz