Manitex A62 Bucket Truck

The Manitex A62 Truck Mounted Aerial Work platform is installed in a Class 5 commercial chassis with no CDL requirements such as the Ford F550 or the Dodge Ram 5500. Equipped with a telescopic boom which can reach a working height of 62 feet, the A62 service truck crane can reach heights of over six stories and has a working radius of 38 feet.

  • The A62 platform differs from competitor products in that it has reduced dimensions and a unique, quick, set up speed.
  • Thanks to it’s ease of use, the A62 aerial lift truck is particularly suitable for overhead and road lighting maintenance as well as sign installation. The “X” pattern outriggers allow the A62 to setup in a single parking space.
  • Available on a Non-CDL truck for maximum mobility and flexibility.
  • The A62 is available for purchase or rent with a 6-month minimum rental.

Starting at with payments as low as $2,000 per month mounted on either a Ford F550 or a Dodge RAM 5500. Nationwide delivery service is available.

Call for more information: 708.505.7937

Contact Us

Manitex A62

Type ArticulationTelescopic
Number Of Sections3
Boom Angle-15 / +75
Chassis Requirements GWVR15,400
Max Capacity550 lbs
Max Height floor of bucket62 feet

Standard Features


  • Start-up and shutdown of the main engine and any auxiliary engine from the basket
  • Protective sidebars
  • Protection on controls area on column and basket
  • Acoustic device for PTO plugged in
  • A self-locking device on rotation
  • Warning device operating outriggers (truck dashboard)
  • Interlock for stabilizers
  • Hand pump for emergency lowering
  • Document folder on the basket
  • Thermal protection on the electrical system
  • Emergency button with stop engine device
  • Hydraulic basket rotation
  • Holding valves on every cylinder
  • Maximum pressure valves on the hydraulic circuit
  • Use and maintenance manual

Available Options

  • Jiblet Winch with 200 lbs max capacity
  • 220/110V 2.2 kW electrical power in the basket
  • Various body options including service body and flatbeds


  • Steel tubes bolted to truck’s chassis. Equipped with 4
    vertical stabilizers feet mounted on body with direct
  • The front part of the frame is fitted with the attachment plate for housing the rotation fifth wheel.
  • Chassis also features an anti-slip aluminum charging floor.

Request A Quote

Hydraulically powered high stregth form steel boom. The boom has an operating range of -15° a + 75° and is fitted with self-lubricating, low-friction material boom sliders. Internal channel for the hoses and cables connected to the basket.
Operator basket is made of aluminum and measures 67 x 28 x 43 Inches. A safety pedal is installed to detect if operator is positioned correctly: this device allows aerial working only if the operator is in control position.

Safety belt: Fasteners inside the basket are secured to the aluminum reinforcement points.

Automatic and manual control to level the basket.
System Features:Hydraulic controls that can run several functions at simultaneously.

Outriggers 4 high penetration X type outriggers. With control stations on both sides of the machine.

Basket Controls:
• Proportional hydraulic controls are located in the basket, protected by fixed guards.
• Hand pump for emergency lowering. Located adjacent to outrigger controls on the passenger side.
• An emergency stop button for crane control is located in the basket as well as on the turret control panel.

High Strength turret powered by hydraulic swing motor. Includes manual control station at base of turret

Weight Study

A-62 on a Ford F550 with
service body.

Powered by Top Rated Local®